| |
Where can
Tactmark TM4 markers be purchased? |
| |
TACTMARK is the manufacturer of TM4 series markers
and do not sell directly to the user. We’re currently
seeking dealers worldwide, you’ll be able to purchase
from a dealer in your area in the near future. |
| |
|
| |
| |
What is the difference
between TM4 Makers and “K68 Series” sold by RAP4.com? |
| |
They’re the same markers sold under different brand
names. RAP4 has been marketing our markers under the
“K-Series” moniker. We ARE the MANUFACTURER and we’ll
be marketing these markers under the “TACTMARK” brand
and “TM4” series line starting 2007. |
| |
|
| |
| |
Where are TACTMARK markers
produced? |
| |
All TACTMARK markers are proudly made
in Taiwan. |
| |
|
| |
| |
Do TACTMARK markers
come with a warranty? |
| |
Yes, all TACTMARK markers come with a
limited 1 year manufacturer’s warranty, visit our support
page for further details. |
| |
|
| |
| |
Are there other paintball
marker manufacturers that make magazine fed markers? |
| |
There’re currently only 3 magazine fed paintball marker
manufacturers in the world. RAM makes only 0.43 cal
action markers, while ATS is the only other manufacturer
that makes 0.68 cal markers. Tactmark markers are priced
considerably less while out-performing the competition. |
| |
|
| |
| |
What are some new features
on TM4 series markers? |
| |
1.) New models
2.) New raised carrying handle and front sight for better
sight acquisition
3.) New see through magazines
4.) New extended magazine release button |
| |
|
| |
| |
Can TACTMARK markers
be customized? |
| |
Yes, TACTMARK markers are easily customized. TM4 series
markers will accept a wide range of accessories made
by TACTMARK and other manufacturers. |
| |
|
| |
| |
I want a TACTMARK marker,
but I want other variants other than the M4/ M16, what
can I do? |
| |
While we currently do not make variants such as the
AK47, G36, or Mp5, you can easily purchase readily available
front end/ stock kits to fit on TM4 receivers. Any kit
that fits Tippmann A5 series will work on TM4s. |
| |
|
| |
| |
How far do these markers
shoot? |
| |
They have a maximum range of 250 feet and an effective
range of 150 feet. |
| |
|
 |
| |
How fast do these markers
shoot? |
| |
TM4 markers shoot between 280-320fps. |
| |
|
| |
| |
How accurate are these
markers? |
| |
TM4 markers are some of the most accurate markers
on the market today. |
| |
|
| |
| |
Do TM4 markers require
maintenance? |
| |
Our markers are extremely reliable and need very little
maintenance other than the occasional oiling of parts
and cleaning of the barrel. Almost all maintenance can
be performed by the user. |
| |
|
| |
| |
What is “quick clear” anti chop system? |
| |
Once in a while, a paintball will get chopped or break inside the receiver of the paintball marker. In most cases, the marker would have to be taken apart immediately, and the user has to stop shooting. TM4 markers have a revolutionary system that allows a user to keep using the marker even after a ball breaks. The broken paintball is defused inside the receiver, and any paint that gets inside the barrel gets blown out. Normal accuracy will return after 5-6 shots. Our markers will never leave you stranded in the heat of battle. |
| |
|
| |
| |
What kind of air system
can I use with TM4 markers? |
| |
TM4 markers will work with either CO2 or compressed
air systems. TM4s have multiple air system mounting
points to ensure a fit for every user. |
| |
|
| |
| |
If I start off by purchasing
the cheapest TM4 series marker (CQB), can I upgrade
to a higher model later on? |
| |
Yes, the CQB can be turned into any other TM4 series
marker with the purchase of upgrade kits. Consequently,
you can change any TM4 model into other TM4 models with
Tactmark factory upgrade kits. |
| |
|
| |
| |
Can I use a hopper and
a magazine at the same time? |
| |
While it’s technically viable to do this, we recommend
the user use one feeding mode at a time. When both systems
are used simultaneously, the magazine is emptied out
before the hopper, thus making the magazine redundant. |
| |
|
| |
| |
How long does it take
to change from hopper feed mode, to magazine feed mode? |
| |
It takes 2-3 minutes with a flathead screwdriver,
or a small coin to change from one feeding mode to the
other. |
| |
|
| |
| |
Can I mount optics,
flashlights, or laser pointers to TM4 markers? |
| |
Yes, accessories such as red dot scopes, rifle scopes,
and flashlights can easily fit on TM4 markers. Most
accessories that fit on airsoft guns, and even real
firearms will fit on TM4 markers. |
| |
|
| |
| |
Can TM4 markers be used
for law enforcement? |
| |
Yes, TM4 markers can be used effectively for tactical
training, and riot control. Tactmark has models specifically
made for LE purposes. Please email us for further details. |
| |
|
| |
| |
Can TM4 markers shoot
full auto? |
| |
While TM4 markers are made to shoot semi-auto only
from the factory, it’s possible to convert our markers
to shoot full auto or burst with after market parts.
We plan to release our own full auto version in the
near future. |
| |
|
| |
Total
: 35003
